It will ask for the Printer name - enter a new name or use the existing one. Unplug the power cord from the wall outlet. With the product turned on, disconnect the power cord from the rear of the product. Step one: Reset the printer Press the Power button () to turn on the product. If you are asked, use the currently installed driver.ĩ. Solution one: Perform a reset Sometimes, restarting the product can clear a paper feed issue. If your printer model was not listed, then select Have Disk, browse the HP CD that came with your printer and select the first file that starts with hp and ends with inf. Select Hewlett-Packard from the list of manufacturers and select and select your printer model. You can go back and retry or using the printer's IP address instead of the host name.ħ. If you get a message about Additional Port Information Required, then the printer was not found using the host name. Under Hostname or IP address, enter the printer's host name (found on the printer's network configuration report the generated above). Select Create a new port and select Standard TCP/IP Port and click Next button.Ħ. Click > Start > Control panel > Printers.ĥ. Verify that you can access the printer's internal web page by browsing to its IP address before continuing.Ģ. Make sure the printer is turned on and connected to your network. Do this (this is for Vista, 7 will be similar):ġ.
#HP PHOTOSMART PLUS B209A MANUAL INSTALL#
Make sure to disable your entire security system during software installation, by the way.Īnyway, assuming you can get to the end of the software install (or maybe you have and you don't know it). The software is either installed or you can check the box that says install software even though it is not shown (or something).
Notebook Hardware and Upgrade Questions See the documentation for your Bluetooth device for specific instructions on starting a print job.
0 kommentar(er)
